Rugged Real-Time Spectrum Analyzer


10MHz-6GHz (opt. 8GHz) | 160MHz RTBW (opt. 245Mhz)

Get a quote

The SPECTRAN V6 XFR PRO is the world’s first and only military standard real-time spectrum analyzer. The XFR PRO offers all the advantages of a rugged Laptop and combines these with a powerful real-time spectrum analyzer. Developed and built for extreme conditions and independently MIL-STD-810G and IP65 tested.

Robuster Echtzeit-Spektrumanalysator SPECTRAN V5 XFR Pro

The V6 XFR offers up to 245MHz real-time bandwidth in the frequency range from 10MHz to 6GHz. The device can be also used as a powerful laptop. Perfectly suited for frequency-monitoring and the detection of unknown or illegal signal transmissions.

• Frequency range from10MHz to 6GHz (opt. 8GHz)
• Real-time bandwidth of up to 245MHz (I/Q)
• MIL-STD-810G and IP65 certified
• Up to 8 TB SSD (Hard Disk / Storage)
• Automatic Triggers programmable
• Simultaneous surveillance of multiple bands (3G, 4G, 5G, WLAN...)
• Real-time and sweep spectrum analyzer in one
• Including software with daily updates
• 1THz Sweep in 5ms
• Built-in GPS
• HF Connector N-female

The SPECTRAN V6 XFR PRO was specifically developed for counter-surveillance. The spectrum analyzer, in combination with the RTSA-Suite PRO Software, makes it possible to monitor multiple bands in real-time. It can also trigger an alarm when any suspicious activity occurs – for example in the bands 2G, 3G, 4G, 5G, LTE, WLAN 2,4 or 5,8. Alternatively, the XFR PRO can use the super quick sweep to scan the complete band from 10MHz to 6GHz. This way any interferers, tracking or listening devices can be found and dealt with quickly (with the help of a directional antenna).

It is possible to use the V6 XFR in a stealthier manner – with the display closed – and still record signals and get a warning tone through the audio output or the integrated speakers, if any of the automatic triggers are activated. It is also possible to demodulate audio signal transmissions, if you want to monitor wireless communication.

This spectrum analyzer was independently MIL-STD-810G and IP65 tested. The casing is made from a high-quality magnesium alloy and was specifically designed and developed to protect the analyzer against drops, shocks, spills, vibration and more. The sealed design of the XFR additionally protects it against dust and moisture. This enables the spectrum analyzer to be used in the harshest, most difficult conditions – like jungles, deserts or a polar circle. The V6 XFR PRO can be used at temperatures from -20°C up to +60°C.

Laptop Highlights
• Powerful i7 Processor
• nVidia Geforce GT 745M
• 500GB HDD (optional up to 8TB SSD)
• 15,6” Full-HD 1080p with Multi-Touch
• Removable hard-drive
• Fingerprint Sensor

The V6 XFR PRO is not only a powerful spectrum analyzer, but also a high-performance laptop. The system can be used as a normal Windows-PC. This means that no additional laptop/notebook/tablet is required for computer-based work on-location.

Options / Accessories
• 245MHz Real-Time Bandwidth
• 5ppb (0,005ppm) OCXO Time-Base
Fitting Preamplifiers, 8 different versions (up to 20GHz)
Great selection of Aaronia antennas
• Optional second battery (hot-swap-system)
• DC-Car Adapter
• Backpack

The SPECTRAN V6 can be used together with the new, free and included in the delivery RTSA-Suite PRO Software via USB 2.0. The RTSA is one of the most powerful and flexible spectrum analysis software-solutions on the market. The software gives you the ability to display and analyze signals in real-time in many different ways. It is under constant development, with many new features being added over time. Daily updates can be found in our download-section.

Made in Germany
Like all devices of the SPECTRAN series, the SPECTRAN V6 XFR PRO spectrum analyzer is developed and assembled in Germany, guaranteeing the highest quality standards.

Type and Frequency Range Price
10MHz - 6GHz
Buy now!
Type Frequency Range RTBW Datasheet/Price
10MHz - 6GHz160MHz (opt. 245MHz)

  •  Frequency Range from 10MHz to 6GHz (opt. 8GHz)
  •  Up to 245MHz (I/Q) Real-Time Bandwidth
  •  Perfect for counter-surveillance, f.e. detection of bugs
  •  POI: 97 ns (FFT-based), 10ns (I/Q-based)
  •  MIL-STD-810G and IP65 certified
  •  Up to 8 TB SSD (Hard Disk / Storage)
  •  Automatic Triggers programmable
  •  Patented Polyphase Filter Technology
  •  Simultaneous surveillance of multiple bands (3G, 4G, 5G, WLAN...)
  •  Real-time and sweep spectrum analyzer in one
  •  Scans 6GHz in less than 5ms
  •  Incl. "RTSA-Suite PRO" Software

With the RTSA-Suite PRO there are many ways to display and analyse any received or recorded data. The software is being updated and expanded with new features almost daily.

Echtzeit-Spektrumanalysator Software RTSA Suite

Scope of delivery

SPECTRAN V6 XFR PRO, OmniLOG 70600 antenna (700MHz - 6GHz), RTSA-Suite PRO software (on a USB drive), international charging cable with adapters.

Frequency Range10 MHz - 6 GHz
Real-Time Bandwidth 160 MHz (Standard) /
245 MHz (Option 0245)
POI97 ns (FFT-based), 10 ns (direct I/Q-based)
Max. Power at RF input (50 Ohm)+23 dBm
DANL (internal pre-amp on)typ. -170 dBm/Hz
Amplitude accuracy (typ.)typ. +/- 0,5 dB
RF input 50 Ohm (N-connector)
Frequency reference accuracy0,5 ppm (Standard) / 5 ppb (Option 002)
DemodulatorAM, FM
Measurement UnitsdBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm²
DetectorMin, Max, AVG, Peak, QPeak
Attenuator range50 dB / 70 dB (0,5dB steps)
Reference range-200 dBm to 100 dBm
Measurement modesI/Q, Power/Frequency Data
ViewsSpectrum, Persistence Spectrum, Spectrogram / Waterfall, Histogram
GPSBuilt-in GPS
TriggerCursor, Measurement, Density
DSP Processing930 GMACs
Temperature Range-20 °C to +60 °C
Humidity95% relative humidity, non-condensing
Laptop Specs
CPUIntel Haswell i7-4600M
HDD500GB, 7200RPM (optional SSD up to 8TB)
Operating SystemWindows 10 Pro
Display15,6“ Full-HD 1080p with Multi-touch screen, sunlight readable (800 Nits Quadra-Clear)
Graphics CardnVidia Geforce GT 745M
BatteryIntelligent lithium ion battery with 8700mAh (optional second battery, hot swap system)
KeypadMembrane keyboard with integrated numeric keypad and LED backlight
Connectors2x PCMCIA Type II, 1x ExpressCard/54, 1 x Smart Card Reader I/O interface: 2x Serial port (9-pin, D -Sub), 1x External VGA port (15-pin, D -Sub), 1x microphone, 1x audio output (mini-jack), 1x DC input, 2x USB 3.0, 2x USB 2.0, 1x USB 2.0 / eSATA combo, 2x LAN (RJ45), 1x HDMI, 1x docking connector (80 - pin)
Interfaces10/100/1000 BASE -T Ethernet Intel Centrino Advanced-N 6200, 802.11 a/b/g/n, GPS module + Tri - Passtrough
Safety FeaturesIntel vPro technology, TPM1.2, fingerprint scanner, smart card reader, Kensington Lock
CertificationMIL -STD- 810G, IP65, MIL -STD- 461F, magnesium alloy casing, shock-proof removable hard disk
Dimensions410 x 315 x 120mm
Weight8 kg
Power SupplyAC Input: 100-240V, 50-60Hz DC Output: 19V, 4,74A max.
Power Consumption< 90W
Country of OriginGermany
Recommended Calibration Interval2 years

Option 0245: 245MHz RTBW
Extends the real-time bandwidth from 160MHz to 245MHz.
Available for the V6-RSA2000X and V6 XFR PRO.
+ 5.996,00€ Shop
Option 0020: Ultra Low Noise Preamp
Note: The V6-RSA2000X and all form factors with this device requires two of these extensions
+ 498,00€ Shop
Option 0002: OCXO Timebase
5ppb (0.005ppm)
This high-precision OCXO time base, which was specially developed for the SPECTRAN® V6 X, leads to a significant reduction in phase noise (jitter). This allows the use of much narrower filters, which in turn significantly increases sensitivity. This option is indispensable to make full use of the maximum sensitivity! In addition, the OCXO time base enables much more accurate frequency measurement and display.
+ 1.498,00€
Option 262: DC Car Adapter for SPECTRAN V6 XFR PRO
For charging batteries or operating the device with a car
+ 249,95€
Option 263: Media Bay Battery Pack V5 / V6 XFR 
An additional spare battery for wireless operation.
+ 349,95€
Option 264: Backpack for XFR V6 PRO / MIL
A suitable backpack especially for the SPECTRAN XFR V6 PRO and the SPECTRAN MIL.
+ 279,95€
Preamplifiers (1Hz – 20GHz)
The UBBV series are battery powered preamplifiers, that are compatible to all brands of spectrum analyzers and fit directly on the Aaronia SPECTRAN Handheld analyzer series. Eight different versions cover a frequency range from DC up to 20GHz and offer gain of up to 40dB with very low noise, with and without by-pass functionality. The accurate and specific calibration data of every UBBV preamplifier are saved internally and can be read out via USB.
from 499,95€ Shop
Preamplifiers der UBBV Serie von DC bis 20GHz mit bis zu 40dB Gewinn.
Logper Antennas
The HyperLOGs are Aaronia's world-renowned series of high-qualty log-periodic antennas with an extended frequency range of up to 35GHz. An unrivaled bandwidth combined with high directionality and the high gain are the key ingredients for the success of theses antennas. The HyperLOG series is available as active or passive variants.
from 199,95€ Shop
Direktionale Antenne der HyperLOG Serie
Biconical Antennas
Available as active or passive antennas, the BicoLOGs are the answer when and where ever a biconical antenna is needed. Calibrated starting at 20MHz up to 3GHz, they transform any normal spectrum analyzer into an EMC measurement device for pre-compliance testing.
from 499,95€ Shop
Bikonische Antenne BicoLOG Serie
The Aaronia Probe-Sets are compatible with any spectrum analyzer and enable the pinpoint measurement of interferences from DC up to 9GHz. The delivery scope includes conversion tables and a conversion app, detailed calibration data, 40dB pre-amplifier (PBS 2 only) and a 1m cable. The sets are perfect for the locating of interference sources, measurement of interference field strenghts, injecting fields into circuits to identify those which are EMC-susceptible and the testing of screening and filtering solutions. The sniffer probe sets include a total of 5 EMC probes.
from 1498,-€ Shop
Nahfeldsonden PBS2 DC bis 9GHz
Omnidirectional Antennas
The OmniLOG series was developed as a cost-effective broadband antenna series for omni-directional measurements up to 8GHz. The antennas are small in size, cover frequencies from 300MHz up to 8GHz and have steady gain across the range. Compared to the HyperLOG series, the OmniLOG antennas enables the omni-directional measurement of field-strengths without having to point the antenna at the source. This allows for much faster threshold measurements.
from 99,95€ Shop
Omnidirektionale Antennas von 300MHz bis 8GHz
3D / Isotropic Antennas
The Aaronia IsoLOG 3D Series is a new and unique development. The IsoLOG 3D antenna-array covers frequencies from 9kHz up to 40GHz and offers pinpoint signal tracking accuracy when combined with a real-time spectrum analyzer. The handy IsoLOG 3D Mobile covers the range from 9kHz up to 6GHz and its main purpose are 3D EMC / EMI measurements.
from 2198,-€ Shop
IsoLOG 3D Mobile und 360° Peilantennen-Array IsoLOG 3D von 9kHz bis 40GHz
Horn Antennas
The horn antennas of the PowerLOG series impress through their high input power (up to 500W) and gain of up to 20dBi. The delivery scope of the antennas include a detailed, specific calibration certificate and they can be used for EMC tests, RF emissions measurements and signal transmission. The very wide frequency range from 700MHz up to 40GHz can be covered by the use of only two antennas of this series.
from 1798,-€ Shop
Horn Antennas PowerLOG Serie
Magnetic Field Antennas
The MDF and Magnotracker series are Aaronia's high quality magnetic field tracking antennas for signal localization and field strength measurements starting from 1Hz. Available in 8 different versions (2 passive, 6 active), the Aaronia magnetic field trackers cover an extremely broad band of frequencies - from 1Hz up to 400MHz.
from 299,95€ Shop
Magnetfeld Antennas MDF Serie von 9kHz bis 400MHz
50000mAh Power Pack
Portable Powerbank with a capacity of 50.000mAh. Can charge up to four devices simultaneously. With a 20V/3A, a 12V/2,5A, two 5V/2,1A and two 5V/1A connectors.
+ 359,00€ Shop
20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm.
+ 149,95€ Shop
20dB Attenuator
DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.
+ 99,95€ Shop
DC Blocker (SMA)