The SPECTRAN® V6 MIL is a military-standard outdoor real-time spectrum analyzer predestined for processing and storing I/Q data. It offers all the benefits of an extremely rugged laptop combined with our SPECTRAN® V6 real-time spectrum analyzer. Designed and built for the most extreme conditions and independently tested and certified to MIL-STD-810G and IP65.
Best suited for counterintelligence, e.g. for detecting bugs. The V6 MIL provides up to 245 MHz (I/Q) of real-time bandwidth in a frequency range from 10 MHz to 6 GHz (opt. 8 GHz). Perfect for frequency monitoring and for detecting, analyzing and recording unknown and illegal signal transmissions over a wide frequency range. In addition, the device can be used as a powerful laptop.
• Real-time bandwidth of up to 245 MHz (I/Q).
• Certified to MIL-STD-810G and IP65 standards
• Operates in the temperature range of - 20°C to + 60°C
• 1 TB SSD system hard disk
• 2 TB SSD recording memory (8GB ENTERPRISE version)
• Automatic trigger adjustable
• Simultaneous monitoring of frequency bands (3G, 4G, 5G, WLAN, etc.)
• Real-time and sweep spectrum analyzer in one
• Sweept 6 GHz in less than 5 ms (1 THz/s)
The SPECTRAN® V6 MIL is specifically designed for wideband spectrum analysis. The portable spectrum analyzer in combination with the RTSA Suite software allows to monitor a wide frequency range in real-time or to sweep the complete band from 10 MHz to 6 GHz (opt. 8 GHz) in shortest time with the super fast sweep. Even the shortest signals are reliably detected and localized with a suitable directional antenna. In this way, interferers or eavesdropping and tracking devices can be found and switched off with pinpoint accuracy.
Due to its extremely low POI, the SPECTRAN® V6 MIL is ideally suited for detecting hidden microphones, bugs or other surveillance devices. This enables security organizations to reliably detect and eliminate them. It is also possible to configure an alarm that is triggered when conspicuous signals appear, for example, in the frequency ranges of 2G, 3G, 4G, 5G, WLAN 2.4 or WLAN 5. It is also possible to continue recording signals inconspicuously with the display closed and to emit a warning tone via the audio output (or the loudspeakers) if one of the automatic triggers has been triggered. Long-term storage of I/Q raw data is also easily possible with the optional hard disk expansion. In addition, there is the option of audio demodulation if radio communications are to be monitored.
The SPECTRAN® V6 MIL has been independently tested and certified to MIL-STD-810G and IP65. The high quality alloy housing is specifically designed to make the analyzer shock, vibration and drop resistant. In addition to this, the system is sealed to provide complete protection against dust and moisture. This allows the spectrum analyzer to be used in the most difficult operations, such as in the desert, in the jungle, or even in the polar region. The SPECTRAN® V6 MIL is fully usable at temperatures from -20°C to +60°C.
The V6 MIL is not only a powerful spectrum analyzer, but also a well-equipped laptop. The system can be used as a normal Windows computer. What this means for you is that there is no need for an additional laptop/notebook/tablet, etc., when other computer-related tasks need to be done on site.
• Powerful Intel® Xeon® processor E-2176
• 64 GB RAM
• Dedicated NVIDIA GTX 1050 graphics card with 4 GB
• 1 TB SSD system hard drive / 2 TB SSD recording storage (8GB ENTERPRISE version)
• Glare-free 15.6" widescreen display (Full HD: 1920 x 1080) with LED backlighting
• Removable hard drives and batteries
Options / Extensions
• 245MHz* (I/Q) real-time bandwidth
• Frequency extension to 8GHz
• 5ppb (0.005ppm) OCXO time base
• Internal preamplifier
• GPS (incl. external antenna)
• Optional SSD hard drive expansion
• Wide selection of Aaronia antennas
Spectrum Analysis Software RTSA Suite PRO.
The V6 MIL comes with pre-installed RTSA-Suite PRO software. This is one of the most powerful and versatile spectrum analysis software solutions on the market. The RTSA-Suite PRO allows signals to be displayed and analyzed in real-time in a wide variety of ways. The software is constantly being developed and new features added. There are daily updates in the download section.
• Technical Surveillance Countermeasures (TSCM)
• Government sweep teams for internal and external security
• Security surveys to detect and prevent eavesdropping
• RF environment monitoring and interference management
• Monitoring all incoming and outgoing signals from military bases
• Radio monitoring and enforcement
• Maintenance, installation and repair both in the factory and on-site
• VIP monitoring
• In-conference monitoring
• EMC / EMI testing
• Detection of weak signals masked by stronger signals
• Detection of rare, short duration events
• and much more...
Made in Germany
Like all devices of the SPECTRAN® series, the SPECTRAN® V6 MIL spectrum analyzer is completely developed and manufactured in Germany. Thus we can offer the highest standard of quality.
|Type and Frequency Range||Price|
10MHz - 6GHz
|V6 MIL PRO|
10MHz - 6GHz
|V6 MIL ENTERPRISE|
10MHz - 6GHz
|V6 MIL||10MHz - 6GHz|
|80 MHz Rx||24.980,-Buy now!|
|V6 MIL PRO||10MHz - 6GHz|
|120 MHz Rx|
120 MHz Tx
|V6 MIL ENTERPRISE||10MHz - 6GHz|
|160 MHz Rx|
120 MHz Tx
|SPECTRAN V6 MIL||SPECTRAN V6 MIL PRO||SPECTRAN V6 MIL ENTERPRISE|
|Connectors||1 x Rx||1 x Rx|
1 x Tx
|2 x Rx
|Realtime Bandwith||80 MHz Rx||120 MHz Rx|
120 MHz Tx
|160 MHz Rx (opt. 245 MHz)
120 MHz Tx
|SSD Recording Storage||2 TB (expandable)||2 TB (expandable)||8 TB|
|V6 MIL Spectrum Analyzer|
|Frequency Range||10 MHz - 6 GHz|
|Real-Time Bandwidth||Depend on version (see table above)|
|POI||97 ns (FFT-based), 10 ns (direct I/Q-based)|
|Max. Power at RF input (50 Ohm)||+23 dBm|
|DANL (internal pre-amp on)||typ. -170 dBm/Hz|
|Amplitude accuracy (typ.)||typ. +/- 0,5 dB|
|RF input||50 Ohm (N-connector)|
|Frequency reference accuracy||0,5 ppm (Standard) / 5 ppb (Option 002)|
|Measurement Units||dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm²|
|Detector||Min, Max, AVG, Peak, QPeak|
|Attenuator range||50 dB / 70 dB (0,5dB steps)|
|Traces||ACT, AVG, MAX, MIN|
|Reference range||-200 dBm to 100 dBm|
|Measurement modes||I/Q, Power/Frequency Data|
|Views||Spectrum, Persistence Spectrum, Spectrogram / Waterfall, Histogram|
|Trigger||Cursor, Measurement, Density|
|ADC||2 GSPS 16Bit|
|DSP Processing||930 GMACs|
|Temperature Range||-20 °C to +60 °C|
|CPU||Intel® Xeon® Prozessor E-2176M 2,7 GHz, 12 MB Intel® Smart Cache, up to 4,4 GHz|
|SSD||1 TB NMVe (m.2) system hard disk
2 TB recording storage, expandable (up to 8 TB)
|Operating System||Windows 10 Pro|
|Display||LCD 15,6“ Full-HD 1080p with LED backlight, sunlight readable, glare-free optical bonded display|
|Graphics Card||Dedicated nVidia GTX 1050 with 4 GB|
|Battery||2x Li-ion polymer 10.8V/6900 mAh batteries
Standard power supply 230 V, opt. vehicle adapter
|Keypad||German or optional US layout|
|Connectors||2x USB 3.1 Gen.2 (1x 1.5 A fast charge); 1x Microphone; 1x Audio output; 1x Line-in; 1x GLAN RJ45; 1x MIL DC-In; 1x VGA; 1x Displayport 1.2; 2x Seriell DB9 (COM 1-2)|
|Relative humidity||95% relative humidity, non-condensing|
|Dimensions||392 x 300 x 42.5 mm (with rubber corners)|
|Country of Origin||Germany|
|Recommended Calibration Interval||2 years
The RTSA-Suite PRO is a powerful real-time spectrum analysis software that uses new, innovative and patented methods that significantly improve the workflow and evaluation of your measurement data. RTSA-Suite PRO is modular and can therefore be easily extended. A simple configuration via blocks in the software (block system) enables optimal settings for every conceivable measurement situation.
The RTSA Suite PRO is multi-platform compatible and available for the operating systems Windows and Linux.
With 245MHz, the SPECTRAN® V6 achieves by far the highest 24/7 streaming real-time bandwidth in its class. Until now, only 27MHz or 40MHz of gapless data transmission were available on the market. The V6 sets completely new standards with its 245MHz bandwidth. The impressive screenshot demonstrates the advantage of a high real-time bandwidth: Whereas with 40MHz only a small area of the Wi-Fi would be visible, with 245MHz the entire Wi-Fi band and LTE can be monitored simultaneously in real time. This is also indispensable for all broadband signals such as Wi-Fi 6.
The SPECTRAN® V6 only needs 5ms to cover the entire frequency range of 6GHz. Therefore it sweeps even faster than the human eye could detect. This is an absolute novelty in the USB compact class and enables new measurement possibilities. This screenshot demonstrates a very impressive measurement: Even short signals such as Bluetooth, DECT etc. are easily reproduced by the POI of only 5ms and thus enable a quasi real-time display of the entire frequency spectrum from TETRA to GSM, LTE, 5G and 5GHz Wi-Fi in previously unknown detail.
The extremely low POI of 10ns (97ns via FFT) enables completely new measurement possibilities that were previously unattainable for a USB spectrum analyzer. Even extremely short radar bursts in the nanosecond range can now be analyzed in detail: The screenshot shows a phase-modulated radar burst of only 7µs, which can still be displayed with a temporal resolution of 100ns. Now you get a detailed analysis of your Barker codes in length 13.
The powerful Record & Replay function of the SPECTRAN® V6, together with the RTSA-Suite PRO, enables recording and replay of the FULL IQ bandwidth of up to 245MHz. This was previously reserved for extremely expensive benchtop devices. 24/7 recording is only limited to the size of your optional external hard-drive. An SSD drive is ideal but not necessary. When recording to the drive, old data will be overwritten with new data when storage is limited by utilizing our “smart buffering” (FIFO function).
Several SPECTRAN® V6 units can be coupled using the RTSA-Suite PRO software in order to increase the real-time bandwidth as required. The NYQUIST sensitivity is a special feature that extends the bandwidth of the individual receivers. This enables a highly sensitive measurement despite the high real-time bandwidth. There are only four V6 receivers with 245MHZ RTBW needed to achieve approx. 1GHZ.
The extremely high sensitivity of the SPECTRAN® V6 makes it possible to measure even extremely weak signals, which was only achieved by benchtop analyzers. Hidden or faint signals can be easily detected by the first-class DANL on board. The impressive screenshot shows signals around -170dBm can still be detected with an RBW of 1Hz.
EMC measurements in real-time are achieved by the enormous real-time bandwidth of up to 245MHz as well as the ultra-fast sweep speed of the SPECTRAN® V6 This means that the success of changes, such as taking interference suppression and shielding measures, can be determined and evaluated immediately. The simultaneous display of several limit values increases the speed of the measurement considerably, as they no longer need to be carried out individually. The screenshot shows a simultaneous live measurement according to EN55015 and EN61800-3 standard with visual feedback in case of non-compliance with the limit values (marker in red).
The software IQ signal generator enables the generation of a variety of modulation types. Several signals can also be combined. Among others, the following standards are supported: CW & Sweep (incl. single carrier, multiple carrier, ramp function, carrier list, etc.), Noise (within -200dBm to 0dBm), Pulse (up to 10nS Pulse and Pause Rate), FSK (with up to 20MHz Symbol Rate), QAM (BPSK, ASK, QPSK, QPSK-C, 16-QAM, 64-QAM, 256-QAM, 1024-QAM, 4096-QAM with up to 20MHz symbol rate), OFDM (BPSK, QPSK, QAM16, QAM64, QAM256, QAM1024, QAM4096), Rasterimage (Load a JPG, PNG, BMP or TIFF image and convert it to IQ), Echo/Reflection. The illustration shows how different 2D and 3D IQ demodulators display a 16QAM modulation. These units are required to reach these measurement standards.
With the help of the IQ demodulator block, you can extract single or multiple frequencies range from a complex IQ data stream. A unique feature to the SPECTRAN® V6. This makes massive data reductions or narrowband decoding of several signals possible. Here are two QAM signals that are tapped individually and decoded independently of each other.
The 3D IQ constellation diagram is another special feature of the RTSA-Suite PRO software, as constellation diagrams can only be seen in 2D; Here is a 3D DAB signal (digital radio) with a 2048 FFT. The data is displayed in real time and can be rotated, compressed, and zoomed as desired. You have never experienced IQ data like this before - a unique form of display.
The RTSA-Suite PRO offers, thanks to a tricky deep memory folding algorithm, an extremely high-resolution FFT display with up to 1 million points. Another unique feature allows the entire FFT to be stored in memory. With this amount of data and detail stored from the spectrum, one can now zoom in for greater clarity to evaluate multiple complex carriers as demonstrated in the screenshot.
The "Wrapped Spectrum" view is another unique, patented spectrum monitoring feature that is only available for the RTSA Suite PRO and offers super-high spectrum resolution by "wrapping" the spectrum using multiple lines (1-8). In the screenshot you can see a spectrum from 750MHz to 2.6GHz split into six lines. This uses six times the screen resolution (here a 4K screen resolution: 3840 pixels x 6 = 23040 pixels) to display the complete frequency range. This provides the ultimate overview, especially since the frequency profiles are also displayed here (e.g. Bluetooth, LTE).
A real-time 3D view of a 16QAM modulation. The view can be rotated or compressed in real time. Various lighting and color settings are available. You have never seen QAM like this before.
A real eye-catcher.
Modifiable trigger masks and/or logical operations simplify the acquisition of even shorter signals. In addition, triggers and filters can also be created in relation to pulse lengths, frequency, signal density, etc. For example, Bluetooth and WiFi can be separated from each other. Even cascading of several trigger stages is possible.
The Histograms crystal clear view only RTSA Suite PRO can offer. Extremely high resolution and complex color settings for signal density bring out even the smallest differences. The multifunctional density marker leaves nothing to be desired.
The optional ultra-low-noise preamplifier of the SPECTRAN® V6 offers up to 20dB higher sensitivity and a DANL of -170dBm/Hz. The impressive results can be seen in this screenshot: Two combined spectra, each with (left representation) and without (right representation) preamplifier. The difference is striking.
The RTSA-Suite PRO offers a variety of new display formats for your measurements. How about a histogram view, for example, in 3D? No problem with the RTSA Suite PRO. Here you can see a WiFi and Bluetooth signal as a 3D histogram.
RTSA Suite PRO consists of building blocks that are configured in a flow chart to form a measurement (mission). The mission can then be started. A typical yet simple mission can be seen in the screenshot above. The SPECTRAN® V6 sends out its IQ data to the FFT, which in return sends the Spectra data simultaneously to the histogram, the waterfall and the spectrum. Up to now, a measurement was hardly possible in such a simple and individual way.
For a more complex mission: The SPECTRAN® V6 simultaneously supplies the IQ data of Rx1 and Rx2. The IQ data of the Rx1 is streamed to the local hard disk for recording with the help of the file writer (IQ Recorder). At the same time, the IQ data of the Rx2 is streamed seamlessly to an HTTP client via an HTTP server over the Internet or a local network. Finally, various IQ blocks are also integrated for extended data visualization.
Currently available "blocks" of the RTSA Suite PRO as an overview. Many blocks are already available free of charge in the basic version: Various 2D and 3D views, IQ processing, Trigger, AM/FM Decoder, File reader, File writer, Remote HTTP, Scripts etc., etc. Optionally, additional blocks can be purchased at any time, 30-day free trials or rentals are also available. Simply visit our Online Shop.
The 3D visualization of the RTSA-Suite PRO leaves nothing to be desired. Here is a waterfall in 3D representing the 2.4GHz WiFi band. Bluetooth and WiFi are displayed in real time and with extremely high resolution. The display can be rotated and compressed super smoothly without jerking in real time. Experience data visualization like you have never seen before.
Even extremely high data volumes can still be displayed with the help of the flexible time compression of the 3D views. Here a battery charger and its harmonics or spurious over a long period of more than 20 minutes. The frequency drift over this time is almost a work of art.
The IQ Pulse Inspector Block is a powerful tool and enables decoding a wide range of digital standards. The detection is completely automatic. Among others, the following standards are supported: Auto, Auto Basic, ASK, FSK, GFSK, BPSK, DBPSK, PSK, QPSK, QPSK_C, DQPSK, P4DQPSK, 8DPSK, QAM16, QAM64, QAM256, QAM1024, Bluetooth LE (Low Energy), Bluetooth EDR 2M, Bluetooth EDR 3M, DECT, GSM, WiFi 802. 11b, Wi-Fi 802.11g (5MHz), Wi-Fi 802.11g (10MHz), Wi-Fi 802.11g (20MHz), Enhanced Shockburst
The Channel Power Block enables a detailed channel power measurement: In addition to the graphical real-time display of the spectrum, the secondary channels, the CHP, ACPR/ACLR and OBW are automatically measured and continuously displayed. At the same time, all channels in the entire spectrum and their individual power can be visualized in real-time. Here the DECT band together with all current carriers.
The measurement of harmonics is done by our "Harmonics Spectrum Analyzer" block: Up to 11 harmonics can be measured simultaneously. The number of harmonics, as well as the RBW and span, are freely adjustable to ensure the best possible measurements. The THD and percentage display are automatically updated after each measurement.
The RTSA Suite PRO, together with our IsoLOG 3D DF antenna, offers real-time 3D signal direction finding in under 1µs. Any number of transmitters across the entire frequency spectrum can be simultaneously located, even with an extremely high accuracy of less than one degree. A powerful map view including 3D topography, 3D buildings, and RF propagation models complete the 3D direction finding software package. Real-time cross bearings through several antennas or utilizing a radio measurement truck are also supported. With these features, even the GPS position and the height of the transmitters are determined. A totally unique feature. Furthermore, cameras (incl. tracking), jammers and radars can be integrated. A powerful software package that leaves nothing to be desired.