The SPECTRAN V5 OEM is the most compact version of the SPECTRAN V5 real-time spectrum analyzers. Despite the small build, the V5 OEM is capable of capturing even the shortest signal transmissions. It was specifically developed with easy integration in third-party systems in mind.
The V5 OEM can be easily integrated in existing systems and needs very little space. This makes the use of the analyzer with up to 175MHz real-time bandwidth and a frequency range from 9kHz up to 20GHz an easy decision.
• Frequency range from 9kHz up to 20GHz
• Real-time bandwidth of up to 175MHz
• Including software with daily updates
• Low-noise due to passive cooling
• Very compact
• Real-time and sweep spectrum analyzer in one
• 20GHz sweep in 20ms
The size of the SPECTRAN V5 OEM was reduced as much as possible, in order to make it easier to integrate into any existing projects. With its measurements of 77x88x40mm, it can fit into many systems, that couldn’t house any other spectrum analyzer. The delivery includes special rails to which the device should be attached, and which give the V5 OEM strong hold in all situations. Additionally, the SPECTRAN V5 OEM has an interface for custom buttons and diodes. This means that customized on and off buttons and LEDs for the analyzer can be connected to the casing or control surface of your system.
The USB-CR is an interface, which allows for multiple SPECTRAN V5 OEMs to be used combined. This way, with the help of the RTSA Suite PRO, the system can reach real-time bandwidths of up to 20GHz. Please contact us for more information.
Options / Accessories
• Powermeter 20GHz / 40GHz
• 5ppb (0,005ppm) OCXO Time-Base
• Fitting Preamplifiers, 8 different versions (up to 20GHz)
• Great selection of Aaronia antennas
The SPECTRAN V5 can be used together with the new, free and included in the delivery RTSA Suite Software via USB 2.0. The RTSA is one of the most powerful and flexible spectrum analysis software-solutions on the market. The software gives you the ability to display and analyze signals in real-time in many different ways. It is under constant development, with many new features being added over time. Daily updates can be found in our download-section.
Made in Germany
Like all devices of the SPECTRAN series, the SPECTRAN V5 OEM spectrum analyzer is developed and assembled in Germany, guaranteeing the highest quality standards.
|HF-80200 V5 OEM|
|Frequency Range (min)||9kHz|
|Frequency Range (max)||20GHz|
|Real-Time Bandwidth||88MHz (Standard) / |
160/175MHz (Option 160)
|Min. Event Duration for 100% POI||<1µS|
|Max. Power at RF input (50 Ohm)||+20dBm (Standard) / +33dBm (SMA Attenuator)|
|DANL (internal pre-amp on)||typ. -150dBm/Hz|
|DANL (with external pre-amp)||max. -170dBm/Hz|
|Amplitude accuracy (typ.)||typ. +/- 1,5dB|
|RF input||50 Ohm (SMA-connector)|
|Frequency reference accuracy||0,5ppm (Standard) / 5ppb (Option 002)|
|RBW (resolution bandwidth)||1Hz to 3MHz|
|VBW (video bandwidth)||1Hz to 3MHz|
|Measurement Units||dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm²|
|Detector||Min, Max, AVG, Peak, QPeak (in preparation)|
|Attenuator range||45dB (0,5dB steps, incl. pre-amp)|
|Traces||ACT, AVG, MAX, MIN|
|Reference range||-200dBm to 100dBm|
|Measurement modes||I/Q, Power/Frequency Data|
|Trigger||Cursor, Measurement, Density|
|Video RAM||64 MB|
|GPS||Support via external GPS Logger (see Accessories at page 9)|
|DSP (Dual Core Blackfin)||600 MHz|
|Temperature Range (Operation)||0 °C to +50 °C|
|Temperature Range (Storage)||-20 °C to +60 °C|
|Power Supply||AC Input: 100-240V, 50-60Hz - DC Output: 5,6V, 5A max.|
|Country of Origin||Germany|
|Recommended Calibration Interval||2 years|