Handheld Spectrum Analyzer

SPECTRAN V4 Handheld

9kHz - 9,4GHz | ST 1ms

Buy now

Our latest V4 generation offers a vastly enhanced feature set with significantly faster sample time, more dynamic range, better IP3, reduced phase noise, greater demodulation bandwidth and improved LCD display compared to the previous V3 series. The V4 flagship HF-60100 V4 is suitable for Pre-Compliance and EMC/EMI tests.

Handheld Spektrumanalysator SPECTRAN

Patented technology:
Based on a patented spectrum analyzer method Aaronia can offer a professional RF measurement at a spectacular price level.
Detect sources of interference, find out more about their causes, determine the frequency and intensity of the signal sources, measure limits and boost the functionality by using our high-end PC software.

Limits display:
All SPECTRAN units offer a powerful limits display. Just push the limits button at our Spectrum Analyzer and the high-performance Digital Signal Processor (DSP) of the SPECTRAN constantly calculates the limits and displays the results in real-time. Spectrum analyzers with this high-end feature usually cost thousands of Euro. Just save this cost by using Aaronia analyzers.

EMC antenna included:
The shipment of each SPECTRAN already includes a free EMC directional antenna which covers a wide frequency range.

Made in Germany:
All SPECTRANs are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard.

Type and Frequency Range Price
HF-60100 V4
1MHz(9kHz*) - 9,4GHz
from 1498,-€
Buy now!
Type Frequency Range Datasheet/Price
HF-60100 V4
1MHz(9kHz*) - 9,4GHz
from 1498,-€

  •  Exposure limit calculation and display according to DIN/VDE 0848
  •  Up to 100x faster sample time than V3 units
  •  Up to 80dB higher sensitivity than V3 units
  •  14Bit Dual-ADC
  •  DDC Hardware-Filter
  •  150 MIPS DSP (CPU)
  •  Simultaneously displays frequency and signal strength
  •  DECT & TimeSlot Analyzer
  •  Advanced HOLD Function
  •  Inc. LogPer EMC Antenna HyperLOG
  •  Free MacOS, Linux and Windows software

The MCS Software transforms any SPECTRAN into a powerful measurement solution with real-time remote control via USB and great features (e.g. recording, multiple window display, histogram, waterfall diagram, unlimited number of markers, enhanced limits display etc.).

Spektrumanalysator Software MCS
Examples of use
  •  Pre-Compliance-Test
  •  Radio & TV
  •  TETRA
  •  ISM434
  •  LTE800
  •  ISM868
  •  GSM900
  •  GSM1800
  •  GSM1900
  •  DECT
  •  UMTS
  •  WLAN
  •  Microwave
  •  Bluetooth
  •  LTE2.6
  •  5GHz WLAN

HF-60100 V4
Frequency Range (min)9kHz (Option 900) /
1MHz (Standard)
Frequency Range (max)9,4GHz
Optional PEAK Power-Detector (Maximum usable frequency)10GHz
DANL (Displayed Average Noise Level)-155dBm(1Hz)
DANL (Displayed Average Noise Level) with Preamp (Option 020, 321)-170dBm(1Hz)
Max. Power at RF-Input+20dBm (Standard) /
+40dBm (SMA Attenuator)
Resolution Bandwidth
(RBW) (min)
Resolution Bandwidth (RBW) (max)50MHz
EMC Filter 200Hz, 9kHz, 120kHz, 200kHz, 1,5MHz, 5MHzYes
Units dBm, dBµV, V/m, A/m, W/m² (dBµV/m etc. via PC software)
Internal Datalogger64K (Standard) / 1MB (Option 001)
Accuracy (typ.)+/-1dB

Option 001: 1MB Memory Expansion
This internal memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10,000 logs, while the standard memory will only accomodate approximately 100 of them. Standard memory size is 64K.
+ 99.95€
Option 015: Audio Signal Tracker
The Option 015 provides an accoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal source. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20x). As a highlight, the dynamic can be adapted optimally by moving the reference level.
+ 99.95€
Option 020: Internal 15dB low-noise preamplifier
This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price! The maximum sensitivity of the V4 series without option 020 is lower by 15dB.
+ 99.95€
Option 205: 10GHz peak power meter
A 10GHz peak power meter. This option augments your SPECTRAN® with a power meter with up to 10GHz of bandwidth. Furthermore, it allows exact measurement of signal peaks with high crest factor like those occuring in WLAN technology, or extremely short signals, like RADAR bursts. What’s more, measurement is performed in REAL TIME and BROADBAND, while at the same time being temperature-compensated. It is also an ideal solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the power meter provides a sensitivity of up to approx. -50dBm, while the maximum permissible level is +10dBm. By adding our 20dB attenuator (see price list), the maximum measurable signal level can be enhanced to +30dBm or +50dBm!
+ 249,95€
Option 800: Sensitivity Extension (from 8GHz – 10dB)
Internal hardware upgrade to increase the sensitivity (lower noise floor) of the HF-60100 V4 by an average of 10dB (max. 15dB) between 8GHz and 9.4GHz. Produces slightly higher noise at 1GHz, not recommended for EN tests without UBBV2 preamplifier.
+ 499,95€
Option 900: 9kHz Frequency Extension
Extends the start frequency of the SPECTRAN HF-60100 V4 to 9 kHz. The new, usable frequency range with Option 900 is 9kHz - 9.4 GHz. Perfect for the measurement of conducted emissions according to interference standards such as EN55015, EN61800-3 etc.
+ 499,95€
Preamplifiers (1Hz – 20GHz)
The UBBV series are battery powered preamplifiers, that are compatible to all brands of spectrum analyzers and fit directly on the Aaronia SPECTRAN Handheld analyzer series. Eight different versions cover a frequency range from DC up to 20GHz and offer gain of up to 40dB with very low noise, with and without by-pass functionality. The accurate and specific calibration data of every UBBV preamplifier are saved internally and can be read out via USB.
from 499,95€ Shop
Preamplifiers der UBBV Serie von DC bis 20GHz mit bis zu 40dB Gewinn.
Logper Antennas
The HyperLOGs are Aaronia's world-renowned series of high-qualty log-periodic antennas with an extended frequency range of up to 35GHz. An unrivaled bandwidth combined with high directionality and the high gain are the key ingredients for the success of theses antennas. The HyperLOG series is available as active or passive variants.
from 199,95€ Shop
Direktionale Antenne der HyperLOG Serie
Biconical Antennas
Available as active or passive antennas, the BicoLOGs are the answer when and where ever a biconical antenna is needed. Calibrated starting at 20MHz up to 3GHz, they transform any normal spectrum analyzer into an EMC measurement device for pre-compliance testing.
from 499,95€ Shop
Bikonische Antenne BicoLOG Serie
The Aaronia Probe-Sets are compatible with any spectrum analyzer and enable the pinpoint measurement of interferences from DC up to 9GHz. The delivery scope includes conversion tables and a conversion app, detailed calibration data, 40dB pre-amplifier (PBS 2 only) and a 1m cable. The sets are perfect for the locating of interference sources, measurement of interference field strenghts, injecting fields into circuits to identify those which are EMC-susceptible and the testing of screening and filtering solutions. The sniffer probe sets include a total of 5 EMC probes.
from 1498,-€ Shop
Nahfeldsonden PBS2 DC bis 9GHz
Omnidirectional Antennas
The OmniLOG series was developed as a cost-effective broadband antenna series for omni-directional measurements up to 8GHz. The antennas are small in size, cover frequencies from 300MHz up to 8GHz and have steady gain across the range. Compared to the HyperLOG series, the OmniLOG antennas enables the omni-directional measurement of field-strengths without having to point the antenna at the source. This allows for much faster threshold measurements.
from 99,95€ Shop
Omnidirektionale Antennas von 300MHz bis 8GHz
Horn Antennas
The horn antennas of the PowerLOG series impress through their high input power (up to 500W) and gain of up to 20dBi. The delivery scope of the antennas include a detailed, specific calibration certificate and they can be used for EMC tests, RF emissions measurements and signal transmission. The very wide frequency range from 700MHz up to 40GHz can be covered by the use of only two antennas of this series.
from 1798,-€ Shop
Horn Antennas PowerLOG Serie
Magnetic Field Antennas
The MDF and Magnotracker series are Aaronia's high quality magnetic field tracking antennas for signal localization and field strength measurements starting from 1Hz. Available in 8 different versions (2 passive, 6 active), the Aaronia magnetic field trackers cover an extremely broad band of frequencies - from 1Hz up to 400MHz.
from 299,95€ Shop
Magnetfeld Antennas MDF Serie von 9kHz bis 400MHz
Spectran Car Power Adapter (12V)
Original 12V power supply / battery charger for Spectran Spectrum Analyzer (Handheld and USB-Desktop versions). Perfect as replacement for the included power supply or simultaneous charging of both the Analyzers included in the Spectran bundles.
+ 19,95€ Shop
Zigaretten-Anzünder Adapter 12V
20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm.
+ 149,95€ Shop
20dB Attenuator
3000mAh LiPo Battery
Offers a MUCH higher runtime of the SPECTRAN (up to 400%).  Strongly recommended for autonomic measurement! The 1300mAh standard-battery will be replaced.
Included in delivery. Shop
3000mAh LiPo Akku für SPECTRAN V3 / V4 / NF
Low Loss SMA Cable
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of: 1 Metre | 5 Metres | 10 Metres
+ 29,95€ - 109,95€ Shop
Lowloss SMA Kabel in 0,3m, 1m, 5m und 10m Längen
DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure active powered antennas like GPS or satellite dishes. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the RF-input of your SPECTRAN and you can measure directly on GPS, satellite antennas or even DSL/ISDN etc. lines.
+ 99,95€ Shop
DC Blocker (SMA)
Large Aluminum Tripod
Height adjustable, high stability.  STRONGLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas!
+ 49,95€ Shop
Grosses Alu Stativ
Calibration Certificate
Calibration Certificate for HF and NF Spectrum Analyzer. We recommend to recalibrate the Spectran Analyzers each year.
+ 199.95€ Shop
Aaronia Kalibrierschein
Spectran Protection Rubber (black)
Protects your SPECTRAN unit against shock and looks great! High-End silicone rubber-material.
Included in delivery. Shop
Gummi-Schutzhülle (schwarz) für SPECTRAN V3 / V4 / NF
Miniature Tripod
Detachable handle with super-practical miniature tripod mode: this handle is attachable to the backside of the unit and allows optimal handling (esp. for directional measurement) and even fixed installation of the unit.
+ 19,95€ Shop
Heavy Plastic Carrycase
Shock resistant, heavy version with padding. Available for:

2x SPECTRANs + Accessories + 1x HyperLOG 70xx or 60xxx
BicoLOG Antennas (active/passive)
MDF Antennas (activ/passive)
+ 99,95€ Shop
Transportkoffer Schwarz
Heavy Pistol Grip with polarization-change-function
This highly stable multi-function pistol grip offers a variety of functions and should not be missing in any professional measurement! Specifically, it is strongly recommended for the use of larger antennas like the HyperLOG 30xxx and 40xx series.
+ 249,95€ Shop
Schwerer Multifunktions-Pistolengriff
Spectran USB Cable
To connect your SPECTRAN to the PC. Special version with high performance EMC-ferrite.
Included in delivery. Shop
Aaronia USB Kabel