The omni-directional portable RF field generators of the DFG series offer very high output power. The perfect signal generators for any kind of EMC measurements or screening and shielding material tests.
The portable, battery-operated field strength generator can be used with simple or complex batch programs that start automatically after power (eg CW signal, sweep, pulse, frequency hopping, etc.). Also, the level can be varied; programmable. A direct control (eg at the laboratory bench) is possible via USB. An appropriate, easy to use software for Mac, Linux and Windows, is included.
Please note the applicable legislation to use and own this field generator! We are not liable for any damages, directly or indirectly, resulting from the use of the field generator. The operation or possession of this generator can, depending on the country, be prohibited!
Make absolutely sure that the test transmitter not interferes with regular RF operations (also note harmonics!) and use it in well shielded EMC chambers / laboratories only! The improper use of the test transmitter as misery is strictly prohibited! With the purchase of this equipment you automatically accept these conditions.
|Highest Output Level||+17dBm||+18dBm||+18dBm|
|Lowest Output Level||-48dBm||-45dBm||-45dBm|
|Dynamic Range||Up to 65dB||Up to 63dB||Up to 63dB|
|Modulation||AM, FM, PM|
|Battery Life||up to 4 hours|
|Dimensions (L/W/H)||350 x 160 x 140mm||540 x 225 x 225mm||350 x 160 x 140mm|