100dB RF Shielding-Fleece
Ultra high RFI screening performance fleece with over 100dB damping. Perfect for setting up screened control center, bug free rooms, screening chambers etc.
Aaronia's novel, patented EMC & RFI shielding fleece Aaronia X-Dream offers an impressive RF shielding performance of far more than 100dB. Highest RF screening performance even in the high GHz range. Probably offers the best RF and EMC screening worldwide in this price category.
Optimal for RF shielding applications to set up shielding chambers, bug proofed rooms and screened control centers. Suitable for laboratories, industrial sites, manufacturing, aerospace, screening of electronic circuits and products etc.. This product provides a 100,000 fold higher performance than Aaronia-Shield and is also available as self adhesive version Aaronia X-Dream PLUS!
Aaronia X-Dream Fleece
V6-RSA250X | V6-RSA500X |
V6-RSA2000X |
|
---|---|---|---|
Frequency Range (min) | 10 MHz | ||
Frequency Range (max) | 8 GHz (Basic version 6 GHz) | ||
Real-Time Bandwidth | 80 MHz/opt. 120 MHz | 80 MHz/opt. 120 MHz | 160 MHz/opt. 245 MHz* |
Sweep speed | 300/440 GHz/s | 300/440 GHz/s | 730/1100 GHz |
Signal Generator | - / opt. 120 MHz | 120 MHz | 120 MHz |
I/Os | 1 Rx (opt. 1 Tx) | 1 Rx & 1 Tx | 2 Rx & 1 Tx |
Technical specifications | Spectran V6 X |
---|---|
Real-time bandwidth Rx | Up to 245 MHz (I/Q - via 2 x USB)* |
Real-time bandwidth Tx | 120 MHz (opt. 245MHz) |
POI (FFT-based) | Up to 97 ns |
POI (I/Q-based) | Up to 10 ns |
Max. power Rx | +23 dBm |
Max. power Tx | +20 dBm |
DANL (internal pre-amp on) | Typ. -170 dBm/Hz |
Amplitude accuracy (typ.) | Typ. +/- 0,5 dB (compensated by FIR filter) |
USB streaming connection | One or two USB 3.0 (USB 3.1 Gen1; USB 3.2 Gen1) |
USB bandwidth | Up to 784 MBytes/s sustained throughput to PC (dual USB 3.0) |
Frequency reference accuracy | 0,5 ppm (5 ppb via OCXO option) With GPS Disciplined Time Base: 5 ppb (optional 200 ppt) |
RBW (resolution bandwidth) | 62 mHz to 200 MHz |
Measurement units | Over 20 (e.g. dBm, dBμV, V/m, A/m, W/m², dBμV/m, W/cm²) |
Detector | Min, Max, AVG, Peak, QPeak |
Attenuator range | 50 dB / 70 dB (0,5 dB steps) |
Traces | Over 20 (e.g. ACT, AVG, MAX, MIN, QPEAK) |
Measurement modes | True IQ or Power/Frequency data |
Trigger | Cursor, Measurement, Density |
ADC | Dual 2GSPS 16 Bit |
DAC | 2GSPS 14-Bit |
GPS | GPS/QZSS, GLONASS, BeiDou and Galileo (concurrent reception) |
GPS synchronisation | +/- 10ns timestamping in each data packet |
External Frequenc Reference Input | typ. 10MHz, 3,5VRMS into 50 Ohm (SMB-connector) |
FPGA | XC7A200T-2 |
DSP processing | 930 GMACs |
SDRAM | 2 GB |
RF connectors | SMA (Rx,Tx), SMB (Trigger, Refclock, GPS, PPM). All 50 Ohms. |
Temperature range (operation) | 0 °C to +50 °C (extended -40 to +75 °C) |
Dimensions | 210 x 115 x 30 mm |
Weight | 850 g |
Power | USB 3.2 Gen 1 Type-C PD 3.0 |
Power consumption | Typical 15 W |
Country of origin | Germany |
Recommended calibration interval | 2 years |