German
French
Spanish
Bypass Pre-amplifier UBBV 1060 BPA (100MHz to 6GHz)
Included in delivery
- UBBV 1060 BPA RF Broadband Preamplifier
- 2 mounting brackets for SPECTRAN
- LiPo-Battery (integrated)
- Battery charger and power supply incl. international adapter set
- Aluminum carrying case with foam protection
- Detailed English manual (on CD)
- SMA tool
- Cleaning brush
Application examples
- With bypass-mode for strong signals
- Low noise
- Amplification of very weak signals
- Boosts any antennas gain
- Compensation of negative antenna gain
Options
Currently there are no additional options available.
Accessories
- USB Cable (UBBV)
To connect your external preamplifier to the PC. Special version with high performance EMC-ferrite. Highly recommended for PC use. You can find more product details in our online shop.
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- SMA to N Adapter
To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.
- 20dB SMA Attenuator
Expands the measurement range from +20dBm to +40dBm. More product details in our online shop.
- DC-Blocker (SMA)
The DC-Blocker must be used if you want to measure DC powered signals like DSL/ISDN lines. It prevents the RF-input of the SPECTRAN from being destroyed by the DC-voltages. Simply connect the DC-Blocker to the SMA-input of your SPECTRAN. More product details in our shop.
Downloads
Datasheet (pdf) 
Get Spectrum Analyzer Software!
Ordersheet / Pricelist 
Technical data
- Frequency range: 100MHz to 6GHz
- Noise: 0,9dB (Bypass-Mode) / 1,4dB (Amp. ON)
- Gain: 23dB (typ.), see datasheet graph
- IP3: +34dBm (Amp. ON) / +48dBm (Bypass-Mode)
- Max. power at RF output: +21dBm
- Input: 50 Ohm SMA (f)
- Output: 50 Ohm SMA (m)
- Weight: 146gr
- Dimensions: 81x61x29mm
- Warranty: 10 years
Highlights:
- WITH BYPASS-MODE FOR STRONG SIGNALS!
- Suitable for any brand of Spectrum Analyzers or antennas
- Fits perfectly to any SPECTRAN (mounting brackets included)
- Runs with battery or external power supply
- LONG RUNTIME UP TO 8 HOURS WITH A FULL CHARGE!
- Integrated calibration data on EEprom (readout via integrated USB interface, in preparation)
- Very thick (2mm) aluminum housing offering very good screening
- Includes international charger (110V/220V) and adapter
Bypass RF Pre-amplifier UBBV 1060 BPA (100MHz to 6GHz)
High-End RF Preamplifier up to 6GHz. Works with any brand of Spectrum Analyzers and directly fits to any SPECTRAN. Broadband sensitivity increase by up to 23dB.
The UBBV 1060 BPA can be used anywhere a high gain, low noise amp is called for; digging out those weak shortwave signals or breathing new life into an old analyzer.
Newly designed microwave chips enable the UBBV 1060 BPA to have gain from 50MHz although we only spec the UBBV 1060 BPA from 100MHz. The UBBV 1060 BPA is the ideal general purpose RF amp with low noise and the marvelous bypass-mode, which allows you to adjust to weak or strong signals at the press of a button.
A "must have" to get the maximum performance and flexibility out of any SPECTRAN unit.
Made in Germany:
All UBBV 1060 BPA Preamplifier are developed, individually produced and calibrated in Germany in the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all UBBV 1060 BPA Preamplifiers.
Included in delivery:
All UBBV 1060 BPA amplifier are shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".
