Aaronia Geofon & Vibration Sensor GEO 14

Included in delivery

  • Vibration Sensor GEO 14
  • 1m SMA cable

Application examples

Examples for possible analysis and measurements within frequency range (10Hz - 1kHz):

  • Earth vibration
  • Vibration of machines, electronic devices etc.
  • Monitoring of level or vibration limits


  • Currently there are no additional options available.


  • Currently there are no additional accessories available.


Aaronia Vibrationsensor for vibrationmonitoring

GEO14 geofon with 1m SMA cable connects directly to NF-5030 spectrum analyzer

frequency range of the antenna
€ 199.95*
(10Hz - 1kHz)
loading imagesloading imagesloading images

Technical data

  • Compatible with any Spectrum Analyzer or Oscilloscope brand
  • Design: Vibrationsensor/Geofon
  • Natural frequency: 14Hz
  • Frequency range:  10Hz-1kHz (typ.)
  • Sensitivity: 28.8 V/m/s
  • Accuracy: +/-5%
  • Typical spurious frequency: 190Hz
  • Coil impedance: 375 Ohm
  • Connector: SMA (m)
  • Dimensions (D/H): 25.4x32mm
  • Weight: 74g
  • Warranty: 10 years


GEO 14


Geofon & Vibration Sensor for NF-5030 Spectrum Analyzer incl. SMA connector. Sensitive and wide frequency range down to 10Hz.Perfect for vibrationmonitoring.


The highly sensitive vibration sensors of the Aaronia GEO series offer a surprisingly high sensitivity over a wide frequency range down to 10Hz (4Hz).
They are especially suitable for detecting vibrations in machines and electronic circuitry or in the working environment, as well as monitoring compliance with (official) exposure limits.
In addition to regular monitoring, thanks to their high sensitivity, these probes can also be used as geophone to measure ground motion (displacement).
In conjunction with our SPECTRAN 5030 Spectrum Analyzer and our free analyzer-software "LCS" or "MCS", the entire frequency range between 10Hz (4Hz) and 1kHz can be analyzed, monitored and documented. Long-term recording for days or even weeks is not a problem at all, either.
These sensors are equipped with a 1m SMA cable (similar with the one used with our test-antennas), allowing direct connection to the high-sensitivity signal input of our NF-5030 EMC-Analyzer.


Made in Germany:

All Aaronia vibration sensors are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 3 years warranty for all GEO vibration sensors.