German
French
Spanish
Active highend LogPer Antenne HyperLOG 30200X
Included in delivery
- Active LogPer HyperLOG 30200 X antenna
- Low Noise Preamplifier with integrated LiPo battery (3,5h run time)
- International battery charger and power supply
- Calibration data on EEprom (readout via USB)
- Typical calibration data on CD
- Large aluminum carrying case with foam protection
- Pistol grip with mini tripod function
- Aaronia SMA tool set with over-torque protection
- SPECTRAN is NOT included
Application examples
Application areas to measure with the antenna:
- TETRA
- 70cm amateur radio
- GSM900 / GSM1800 / UMTS
- GPS
- DECT
- Microwave
- WiFi
- HDMI
- Radar
- 2,4GHz / 5-6GHz WLan
- directional radio
- UWB (FB2-FB8)
- etc
Options
- Option 502 (Tactical 150mW Green Power-Laser)
Extreme military grade. Easy to connect on top of any HyperLOG X antenna. Including connector and all needed screws. Perfect for pinpointing any RF source even at bright daylight. About 1000x times brighter than our standard 1mW red laser. Very high range up to 15 km.
WARNING: Only for outside use. This is no toy! Please make sure that you are allowed to use and/or import this gadget before placing an order! - Option 510 (Small Compass Ball)
Great gadget to localize a pinpointed RF source. Works at any antenna position due to its liquid filled ball. Can be used together with above mentioned laser or separately. Including connector and all needed screws.
- Option 530 (Waterproof Housing)
Protects the antenna against water intrusion. Perfect for outdoor use e.g. in the pouring rain. (+€ 49.95)
Accessories
- 1m, 5m or 10m Low Loss SMA Cable
High quality special SMA cable for connecting any HyperLOG®-Antenna or BicoLOG®-Antenna or the preamplifiers UBBV Series with various test equipment like Aaronia RF Spectrum-Analyzer. You can find more details about the article in our online shop.
- SMA to N Adapter
To connect any Spectrum Analyzer etc. with N connector to the HyperLOG antenna (Above SMA cable needed). You can find more details in our online shop.
- Heavy Multifunctional Pistol Grip
Highly recommended for the usage of our HyperLOG antennas: Quick and easy change of antenna polarization, perfect antenna handling (even with the more heavy HyperLOG 40xx and 30xxx series). A MUST-HAVE for any pro user. You can find more product details in our online shop.
- Large Aluminum Tripod
Height adjustable, high stability. HIGHLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas.You can find detailed information in our online shop.
Downloads
Datasheet (pdf) 
Ordersheet / Pricelist 
Technical data
- Compatible with any Spectrum Analyzer brand
- Design: Active Logarithmic-Periodic
- Frequency range: 380MHz - 20GHz
- Nominal impedance: 50 Ohm
- VSWR (typ.): <1:2,5
- Gain (typ.): 19dBi
- Antenna factor: see data sheet graph
- RF connection: SMA socket or N socket using an adapter
- Tripod connection: 1/4"
- Interface: USB 2.0/1.1
- Delivery with typical calibration data
- Dimensions (L/W/D): 590x360x30 mm
- Weight: 1400gr
- Warranty: 10 years
Highlights:
- Ultra high gain for detecting even lowest RF sources
- Integrated Low Noise Preamplifier incl. LiPo battery
- Runs with battery or external power supply (included)
- Integrated calibration data on EEprom (readout via USB)
- Additional standard calibration data (on CD)
- Special designed radome for perfect antenna protection
- Gold coating for stable performance
- Wide bandwidth
- Coverage of various mobile radio frequency ranges
- Suitable for field-strength and EMC measurements due to high precision
- Compact and sturdy design
- Can be used in the lab and for open-field application
HyperLOG 30200 X
The Directional Antennas of the HyperLOG® series 3000 X are based on an ultra-thin, GOLD COATED high tech TEFLON substrate.
Based on this innovative construction, the frequency range could yet again be vastly extended compared to the 4000 X antenna-series.
The lower frequency range now reaches down to 380MHz, thus covering, for example, the important TETRA band (380MHz and up).
The extended upper frequency range up to 20GHz now also allow measurement of unusable signal sources like military radar, various satellite services, and more.
Combined with a spectrum analyzer, an incredible EMC measurement system for mobile or laboratory use is formed, at an affordable price.
As an option, the antenna-calibration-data can even be stored on a special IC on the antenna and be queried with our spectrum-analyser-series at any later time. What more can you ask ?
Made in Germany:
All Aaronia logper antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all EMC antennas.
Exhaustive Calibration data:
All Aaronia active logper antennas include a complete high resolution (10MHz steps!) calibration data set with up to 963 calibration points (on CD). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.
Included in delivery:
Each HyperLOG antenna will be shipped with many accessories in a high-value aluminum carrying case. More details can be found at above section "Included in delivery".
Options:
All HyperLOG X (active) antennas can be equipped with various options which highly expand the functionality. More details about possible options for this HyperLOG are available at above section "Options".
