The Aaronia RF field probe set, which fits to any Spectrum Analyzer, Oscilloscope or measurement receiver, allows straightforward pinpointing and measurement of interference sources from DC (1Hz) to 9GHz in electronic component groups as well as execution and monitoring of generic EMC measurement.
Our sniffer set includes a total of 5 probes: 4 probes for magnetic field measurement and one for measurement of electric fields. All probes are covered with an insulating layer, thus allowing safe measurement of oscillators or mains lines. Perfect for locating interference sources which might have been found e.g. in an EN55011, EN55022 or EN50371 (Class A or Class B) survey. After implementing appropriate changes in the circuit, their efficiency can easily and reliably be verified. That way, expensive and time-consuming re-assessments in an EMC laboratory can be skipped.
Testing
Every probe goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality rubber paint which offers protection against mechanical damage and environmental influence, a top-quality integrated tripod connection and an SMB connector.
Exhaustive Calibration data
All Aaronia probes include a complete high resolution calibration data set with an unmatched number of calibration points and an Excel sheet to calculate dBm reading to V/m, A/m, G and T (on CD). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.
Made in Germany
All Aaronia probes are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 years warranty for all sniffers.
Features
5 different RF probes to measure H and E fields- Passive and Active Versions
- Covered with insulating layer for safe measurements
- Very handy design incl. rubber coated grip
- Very small size. Perfect for exact locating of interference sources
- Integrated electrostatic shield eliminates common-mode pickup
- Can be driven by a signal source to generate fields for electromagnetic susceptibility testing
- Gain rises very linear with frequency which offers high accuracy
- Typical standard calibration data included
- Suitable for field-strength and EMC measurements
- Including tripod connector for perfect adjustment and reproducibility
Documents
Examples of use
- Traction power
- Power lines and cables
- Transformer
- Power supplies and harmonics
- Energy saving light bulbs
- Switching power supplies
- TFT-, LCD-monitors and TVs
- 135kHz RFID
- DSL, ADSL, VDSL
- and more...
Photos
Specifications
| PBS1 | PBS2 | |
|---|---|---|
| Frequency Range | DC-9GHz | |
| Preamplifier | ✘ | ✔ |
| Dimensions (L/W/H) | 300 x 190 x 70 mm | |
| Weight | 1200g | 2000g |
| Warranty | 2 Years |
Accessories
SMA to N Adapter
This special high quality adapter allows operation of all HyperLOG®-Antenna with any standard spectrum-analyzer with N connector.+ 24,95€ Shop
Large Aluminum Tripod
Height adjustable, high stability. STRONGLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas!+ 49,95€ Shop
Heavy Pistol Grip with polarization-change-function
This highly stable multi-function pistol grip offers a variety of functions and should not be missing in any professional measurement! Specifically, it is strongly recommended for the use of larger antennas like the HyperLOG 30xxx and 40xx series.+ 249,95€ Shop
^