Horn Antennas

PowerLOG PRO Series

300MHz - 8GHz

Buy now

The horn antennas of the PowerLOG® PRO series are characterized by enormous broadband and very high input power. The gain increases with increasing frequency up to max. 14 dBi. This increase in gain compensates for the increasing cable losses at higher frequencies.

PowerLOG PRO Horn Antennas

The PowerLOG® PRO series is suitable for both transmitting and receiving purposes. Due to the very high maximum transmission power of up to 500W, the PowerLOG® PRO series is especially suitable for EMC and immunity test measurements.

Exhaustive Calibration data
All Aaronia EMC Antennas include a complete high resolution calibration data set with an unmatched number of calibration points (Certificate and download link to Excel file included). This offers the ability to make a very accurate EMC measurement with any spectrum analyzer.

Made in Germany
All Aaronia pre compliance antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 years warranty for all EMC antennas.

Type and Frequency Range Price
PowerLOG® PRO 30300
Buy now!
PowerLOG® PRO 30800
Buy now!
Datasheet Type Frequency Range Gain Price
PowerLOG® PRO 30300300MHz-3GHz12dBi3998,-€Buy now!
PowerLOG® PRO 30800300MHz-8GHz14dBi6998,-€Buy now!

  •  Constant field strength due to linearly increasing gain
  •  Horizontal & vertical measurement w/o rebuild
  •  Supports very high power levels up to 500W
  •  Includes exhaustive calibration data
Examples of use
  •  GSM1800
  •  GSM1900
  •  DECT
  •  UMTS
  •  WLAN
  •  Microwaves
  •  Bluetooth
  •  LTE2.6

Scope of delivery

PowerLOG® PRO antenna, specific calibration-data

 PowerLOG PRO 30300PowerLOG PRO 30800
DesignQuad Ridged Horn
Frequency Range300 MHz - 3 GHz300 MHz - 8 GHz
(calibrated to 6 GHz)
Max. Input Power 500W
Gain (typ.)12 dBi14 dBi
Nominal impedance50 Ohm
VSWR (typ)<1:2,5
RF-Connector 2 x N (female, H+V)
Operating Temperature-10°C bis +60°C
Dimensions (L/W/D)510 x 507 x 507 mm
Warranty2 Years

SMA to N Adapter
This special high quality adapter allows operation of all HyperLOG®-Antenna with any standard spectrum-analyzer with N connector.
+ 24,95€ Shop
SMA auf N Adapter
Low Loss SMA Cable
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of:

1 Metre | 5 Metres | 10 Metres
+ 29,95€ - 109,95€ Shop
Lowloss SMA Kabel in 0,3m, 1m, 5m und 10m Längen