Magnetic Field Antennas

MDF X Series (Active)

9kHz - 400MHz

Buy now

The Aaronia MDF X series are broadband, active magnetic field tracking antennas, suitable for signal tracking and field strength measurements. In contrast to the passive version, the MDF X series comes with directly attached preamplifier. The thus reached extremely high antenna gain allows the measurement of ultra-weak signals.

Magnetfeld Antennas MDF Serie

Thanks to the high directionality of the antenna, the MDF is ideally suited for signal direction finding.

The preamplifier of the antenna can be operated by an internal battery or by the included USB AC adapter. The battery time is approx. 3-4 hours. The USB connection allows to read out the calibration data of the preamplifier, which are stored in the internal EEPROM and therefore can not be lost.

Made in Germany
All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 years warranty for all MDF antennas.



Versions
Type and Frequency RangePrice
MDF 930X
9kHz-30MHz
999,95€
Buy now!
MDF 960X
9kHz-60MHz
999,95€
Buy now!
MDF 50400X
500kHz-400MHz
1498,-€
Buy now!
DatasheetTypeFrequency RangePrice
MDF 930X9kHz-30MHz999,95€Buy now!
MDF 960X9kHz-60MHz999,95€Buy now!
MDF 50400X500kHz-400MHz1498,-€Buy now!

Features
  •  Suitable for field-strength and EMC measurements due to high precision
  •  High conversion accuracy allows precise field strength measurements
  •  Compact design
  •  For lab and open-field applications
  •  2 Years Warranty
Examples of use
  •  Pre-Compliance-Tests
  •  ADSL, VDSL, DSL
  •  13,56MHz RFID
  •  Amateur Funk
Photos

Scope of delivery

Aaronia MDF X antenna with preamp, USB power charger, waterproof transport case with foam insert, Pistol grip with miniature tripod function





Specifications
 MDF® 930XMDF® 960XMDF® 50400X
DesignMagnetic Field Antenna
Frequency Range9kHz - 30MHz9kHz - 60MHz500kHz - 400MHz
Preamp35dB25dB40dB
Nominal impedance50 Ohm
Operating Temperature-40°C to +60°C
RF-Connector SMA (female)
Dimensions (L/W/D)180 x 180 x 50 mm
Weight350g
Warranty2 Years






Accessories
SMA to N Adapter
This special high quality adapter allows operation of all HyperLOG®-Antenna with any standard spectrum-analyzer with N connector.
+ 24,95€ Shop
SMA auf N Adapter
Heavy Pistol Grip with polarization-change-function
This highly stable multi-function pistol grip offers a variety of functions and should not be missing in any professional measurement! Specifically, it is strongly recommended for the use of larger antennas like the HyperLOG 30xxx and 40xx series.
+ 249,95€ Shop
Schwerer Multifunktions-Pistolengriff
Large Aluminum Tripod
Height adjustable, high stability.  STRONGLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas!
+ 49,95€ Shop
Grosses Alu Stativ
1m, 5m or 10m Low Loss SMA Cable
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of:

1 Metre,
5 Metres,
10 Metres.
+ 29,95€ - 109,95€ Shop
Lowloss SMA Kabel in 0,3m, 1m, 5m und 10m Längen
Frequenzübersicht

^