Our new, patented 3D DF antenna IsoLOG® 3D DF offers as the only antenna on the market a real 3D bearing incl. altitude and elevation! This unique functionality allows e.g. the bearing of flying transmitters (drones, airplanes etc.) and their 3D display in space. Furthermore, the IsoLOG® 3D DF offers an extremely high bearing speed of up to 8 µs per sector.
The IsoLOG® 3D DF consists of a complex sector array of DF antennas and its electronics are protected by an antenna housing (radome). This can be ordered in any color and additionally supplied with imprint. The antenna housing is waterproof, shockproof, heat resistant and can withstand the most severe environmental conditions.
The IsoLOG® 3D DF is the perfect solution for counter-surveillance measurements or for detecting drones (unmanned aerial vehicles). With the "Auto LPDA Rotate-Switch" function, the IsoLOG® 3D DF can be used with any commercially available spectrum analyzer. The wide frequency range eliminates the need to use multiple antennas. This saves a lot of space and system costs, therefore the IsoLOG® 3D DF can also be mounted on small test vehicles (e.g. on drive test carts) and is thus also suitable for covert operations. As the IsoLOG® 3D DF resembles a satellite dish for caravans, it is difficult to identify as a direction finding antenna.
IsoLOG® 3D DF antenna array, Control-software, Ethernet cable
IsoLOG 3D 80-8 | IsoLOG 3D 160-8 | |
---|---|---|
Design | 3D LPDA Array | 3D LPDA Array |
Frequency Range | 400MHz to 8GHz | |
Sectors | 8 | 16 |
Antennas | 16 | 32 |
Max. Input Power | 1 W AM (400MHz) | |
Nominal impedance | 50 Ohm | |
VSWR (typ.) | <1:2,5 (typ.) | |
Internal Preamp | Yes (100MHz-6GHz) | |
Gain (typ.) | 2dBi / 25dBi (with Preamp) | |
RF-Connector | N-Connector (female), alternatively SMA via adapter | |
Operating Temperature | -30°C to +60°C | |
Storage Temperature | -40°C to +70°C | |
Certificates | IP65 | |
Dimensions (L/W/D) | 960 x 960 x 380mm | |
Weight | 22kg | 25kg |
Warranty | 2 Years |
IsoLOG 3D 160-18 | IsoLOG 3D 160-40 | |
---|---|---|
Design | 3D LPDA Array | 3D LPDA Array |
Frequency Range | 400MHz - 18GHz | 400MHz - 40GHz |
Sectors | 8 | 16 |
Antennas | 16 | 32 |
Max. Input Power | 1 W AM (400MHz) | |
Nominal impedance | 50 Ohm | |
VSWR (typ.) | <1:2,5 (typ.) | |
Internal Preamp | Yes (100MHz-6GHz) | |
Gain (typ.) | 2dBi / 25dBi (with Preamp) | |
RF-Connector | N-Connector (female), alternatively SMA via adapter | |
Operating Temperature | -30°C to +60°C | |
Storage Temperature | -40°C to +70°C | |
Certificates | IP65 | |
Dimensions (L/W/D) | 960 x 960 x 380mm | |
Weight | 25kg | approx. 20kg |
Warranty | 2 Years |