Directional Antennas

HyperLOG Series

380MHz - 35GHz

Buy now

Our HyperLOG measurement-antennas offer a very flat gain response over the full frequency range under test which enables them to be the perfect measurement-tools for precision pre-compliance test or site survey.

Direktionale Antennas HyperLOG Serie von 380MHz bis 35GHz

Because of the flat gain response the LPDA offers a very simple power (dBm) to field strength (V/m or W/m²) conversion if connected to a test receiver or spectrum analyzer. The small beam width of the test antenna offers a high directionality to easily pinpoint the radiating RF source under test.

Testing
Every HyperLOG EMC Test-Antenna goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality GOLD COATING, a high-tech antenna-case (radome) which offers protection against mechanical damage and environmental influence, a top-quality integrated tripod connection and an SMA connector (18GHz version) with twist protection.

Exhaustive Calibration data
All Aaronia compliance antennas include a complete high resolution (10MHz steps!) calibration data set with up to 533 calibration points (on CD). This offers the ability to make a very accurate EMC measurement with any Spectrum Analyzer.

Made in Germany
All Aaronia precompliance antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 2 years warranty for all EMC antennas.



Versions
Type and Frequency RangePrice
HyperLOG 7025
700MHz-2,5GHz
199,95€
Buy now!
HyperLOG 7040
700MHz-4GHz
249,95€
Buy now!
HyperLOG 7060
700MHz-6GHz
399,95€
Buy now!
HyperLOG 6080
680MHz-8GHz
599,95€
Buy now!
HyperLOG 60100
680MHz-10GHz
799,95€
Buy now!
HyperLOG 60180
680MHz-18GHz
1498,-€
Buy now!
HyperLOG 60250
680MHz-25GHz
1998,-€
Buy now!
HyperLOG 60350
680MHz-35GHz
2998,-€
Buy now!

Buy now!
HyperLOG 4025
400MHz-2,5GHz
299,95€
Buy now!
HyperLOG 4040
400MHz-4GHz
349,95€
Buy now!
HyperLOG 4060
400MHz-6GHz
499,95€
Buy now!
HyperLOG 3080
380MHz-8GHz
799,95€
Buy now!
HyperLOG 30100
380MHz-10GHz
999,95€
Buy now!
HyperLOG 30180
380MHz-18GHz
1998,-€
Buy now!
HyperLOG 30250
380MHz-25GHz
2498,-€
Buy now!
HyperLOG 30350
380MHz-35GHz
3498,-€
Buy now!
DatasheetTypeFrequency RangeGainPrice
HyperLOG 7025700MHz-2,5GHz4dBi199,95€Buy now!
HyperLOG 7040700MHz-4GHz4dBi249,95€Buy now!
HyperLOG 7060700MHz-6GHz5dBi399,95€Buy now!
HyperLOG 6080680MHz-8GHz5dBi599,95€Buy now!
HyperLOG 60100680MHz-10GHz5dBi799,95€Buy now!
HyperLOG 60180680MHz-18GHz5dBi1498,-€Buy now!
HyperLOG 60250680MHz-25GHz5dBi1998,-€Buy now!
HyperLOG 60350680MHz-35GHz5dBi2998,-€Buy now!
Buy now!
HyperLOG 4025400MHz-2,5GHz4dBi299,95€Buy now!
HyperLOG 4040400MHz-4GHz4dBi349,95€Buy now!
HyperLOG 4060400MHz-6GHz5dBi499,95€Buy now!
HyperLOG 3080380MHz-8GHz5dBi799,95€Buy now!
HyperLOG 30100380MHz-10GHz5dBi999,95€Buy now!
HyperLOG 30180380MHz-18GHz5dBi1998,-€Buy now!
HyperLOG 30250380MHz-25GHz5dBi2498,-€Buy now!
HyperLOG 30350380MHz-35GHz5dBi3498,-€Buy now!

Features
  •  Includes exhaustive calibration data
  •  Special designed radome for perfect antenna protection
  •  Gold coating for stable performance
  •  Wide bandwidth
  •  Coverage of various mobile radio frequency ranges
  •  Suitable for field-strength and EMC measurements due to high precision
  •  Compact and sturdy design
  •  For lab and open-field applications
Examples of use
  •  Radar
  •  GSM
  •  UMTS
  •  DECT-Telefon
  •  Mast radiator
  •  WLAN
  •  Bluetooth
  •  Microwave
  •  Directional Radio
  •  Tetra/BOS
  •  Radio and TV Transmissions
Photos

Scope of delivery

HyperLOG antenna, typical calibration data, aluminum carrying case with foam protection, pistol grip with mini tripod function, Aaronia SMA tool set with over-torque protection.





Specifications
 HyperLOG® 7025HyperLOG® 7040HyperLOG® 7060
Designlog-periodic
Frequency Range700MHz-2,5GHz700MHz-4GHz700MHz-6GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)4dBi4dBi5dBi
Aantenna Transducer Factor 23-34dB/m 23-38dB/m 26-41dB/m
Calibration Points183 (10MHz-Steps)333 (10MHz-Steps)533 (10MHz-Steps)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)340x200x25 mm
Weight270g270g250g
Warranty2 Years





 HyperLOG® 6080HyperLOG® 60100HyperLOG® 60180
Designlog-periodic
Frequency Range680MHz-8GHz680MHz-10GHz680MHz-18GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)5dBi
Aantenna Transducer Factor22-44dB/m22-46dB/m22-50dB/m
Calibration Points733 (10MHz-Steps)933 (10MHz-Steps)1733 (10MHz-Steps)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)340x200x25 mm
Weight250g
Warranty2 Years





 HyperLOG® 60250HyperLOG® 60350
Designlog-periodic
Frequency Range680MHz-25GHz680MHz-35GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)5dBi
Calibration Points487 (50MHz-Steps)687 (50MHz-Steps)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)340x200x25 mm
Weight250g
Warranty2 Years





 HyperLOG® 4025HyperLOG® 4040HyperLOG® 4060
Designlog-periodic
Frequency Range400MHz-2,5GHz400MHz-4GHz400MHz-6GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)4dBi4dBi5dBi
Aantenna Transducer Factor18-34dB/m18-38dB/m20-40dB/m
Calibration Points211 (10MHz-Steps)361 (10MHz-Steps)561 (10MHz-Steps)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)590x360x30 mm
Weight1200gr1200gr1000gr
Warranty2 Years





 HyperLOG® 3080HyperLOG® 30100HyperLOG® 30180
Designlog-periodic
Frequency Range380MHz-8GHz380MHz-10GHz380MHz-18GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)5dBi
Aantenna Transducer Factor20-43dB/m20-46dB/m20-55dB/m
Calibration Points763 (10MHz-Steps)963 (10MHz-Steps)1763 (50MHz-Steps)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)590x360x30 mm
Weight1000gr
Warranty2 Years





 HyperLOG® 30250HyperLOG® 30350
Designlog-periodic
Frequency Range380MHz-25GHz380MHz-35GHz
Max. Output Power100 W CW (400MHz)
Nominal impedance50 Ohm
VSWR (typ.)<1:2
Gain (typ.)5dBi
Calibration Points493 (50MHz-Schritte)693 (50MHz-Schritte)
RF-Connector SMA-Connector (18GHz) or
N-Connector via Adapter
Dimensions (L/W/D)590x360x30 mm
Weight1000g
Warranty2 Years









Options
Option 520: Transparent Version of the Antenna
Beautiful, transparent case for HyperLOG® antennas. Hand-polished!
+ 49,95€
Accessories
SMA to N Adapter
This special high quality adapter allows operation of all HyperLOG®-Antenna with any standard spectrum-analyzer with N connector.
+ 24,95€ Shop
SMA auf N Adapter
Heavy Pistol Grip with polarization-change-function
This highly stable multi-function pistol grip offers a variety of functions and should not be missing in any professional measurement! Specifically, it is strongly recommended for the use of larger antennas like the HyperLOG 30xxx and 40xx series.
+ 249,95€ Shop
Schwerer Multifunktions-Pistolengriff
Large Aluminum Tripod
Height adjustable, high stability.  STRONGLY recommended for usage with HyperLOG 30xxx, 40xx and BicoLOG antennas!
+ 49,95€ Shop
Grosses Alu Stativ
1m, 5m or 10m Low Loss SMA Cable
This high-grade SMA cable can be used to connect Aaronia HyperLOG EMC antennas to Aaronia Spectran RF spectrum analysers with very low damping (signal loss). Available in lengths of:

1 Metre,
5 Metres,
10 Metres.
+ 29,95€ - 109,95€ Shop
Lowloss SMA Kabel in 0,3m, 1m, 5m und 10m Längen
Frequenzübersicht

^