Active EMC Measurement Antennas
The BicoLOG® X series consists of excellent cost effective antennas for low frequency measurements. Perfect coverage of the complete radio & TV frequencies down to 20 MHz including Tetra / BOS and ISM434.
The high-quality active measurement antennas of the BicoLOG® X series are very lightweight and therefore, in addition to the use in the laboratory, also ideally suited for portable measurement devices. Each BicoLOG® X has a high quality SMA connector and can therefore be connected immediately to many spectrum analyzers. Instruments with an N-connector can be connected via our optional adapter. When using our high-sensitivity HF-60100 V4 Spectrum Analyzer with Preamplifier, all required calibration data is already provided automatically in the Spectrum Analyzer Software MCS, enabling fast and professional measurements right from the start.
BicoLOG X antenna with preamplifier, Typical calibration data, Transportation case, Aaronia SMA tool.
BicoLOG® 5070 X | BicoLOG® 30100 X | BicoLOG® 20100 X | |
---|---|---|---|
Design | Biconical | ||
Frequency Range | 50MHz-700MHz | 30MHz-1GHz | 20MHz-1GHz |
Nominal impedance | 50 Ohm | ||
Gain (typ.) | 11dBi to 41dBi | 1dBi to 41dBi | -5dBi to 41dBi |
Calibration Points | 70 (5MHz or 10MHz Steps) | 104 (5MHz or 10MHz Steps) | 106 (5MHz or 10MHz Steps) |
RF-Connector | SMA-Connector (18GHz) or N-Connector via Adapter |
||
Dimensions (L/W/D) | 350x160x140 mm |
||
Weight | 500g | ||
Warranty | 2 Years |
BicoLOG® 20300 X | BicoLOG® 30100E X | BicoLOG® 20100E X | |
---|---|---|---|
Design | Biconical | ||
Frequency Range | 20MHz-3GHz | 30MHz-1GHz | 20MHz-1GHz |
Nominal impedance | 50 Ohm | ||
Gain (typ.) | -5dBi to 41dBi | 9dBi to 41dBi | 2dBi to 41dBi |
Calibration Points | 296 (5MHz or 10MHz Steps) | 194 (5MHz Steps) | 196 (5MHz Steps) |
RF-Connector | SMA-Connector (18GHz) or N-Connector via Adapter |
||
Dimensions (L/W/D) | 350x160x140 mm |
540x225x225 mm | 540x225x225 mm |
Weight | 500g | 1300g | 1300g |
Warranty | 2 Years |